1.

A comparative study of biocarbon reinforced polyoxymethylene and polyamide: materials performance and durability / Jacek Andrzejewski (WIM), Joanna Aniśko (WIM), Joanna Szulc // Composites Part A: Applied Science and Manufacturing - 2022, vol. 152, p. 106715-1-106715-14

Scientific article 140.0 7.664

2.

Analysing regular nonlinear vibrations of nano/micro plates based on the nonlocal theory and combination of reduced order modelling and multiple scale method / Jan Awrejcewicz, Grażyna Sypniewska-Kamińska (WIM), Olga Mazur // Mechanical Systems and Signal Processing - 2022, vol. 163, p. 108132-1-108132-34

Scientific article 200.0 6.823

3.

A three-dimensional finite element analysis of tuning the selected acoustic helicoidal resonator by the change of its mandrel diameter / Wojciech Łapka (WIM) // Applied Acoustics - 2022, vol. 185, p. 108443-1-108443-5

Scientific article 100.0 2.639

4.

(Bio)degradable biochar composites – Studies on degradation and electrostatic properties / Marta Musioł, Joanna Rydz, Henryk Janeczek, Aleksandra Kordyka, Jacek Andrzejewski (WIM), Tomasz Sterzyński (WIM), Sebastian Jurczyk, Mariana Cristea, Krzysztof Musioł, Marian Kampik, Marek Kowalczuk // Materials Science and Engineering B - 2022, vol. 275, p. 115515-1-115515-10

Scientific article 100.0 4.051

5.

Energy consumption of the wood size reduction processes with employment of a low-power machines with various cutting mechanisms / Łukasz Warguła (WIM), Mateusz Kukla (WIM), Bartosz Wieczorek (WIM), Piotr Krawiec (WIM) // Renewable Energy - 2022, vol. 181, p. 630-639

Scientific article 140.0 8.001

6.

Experimental approach to modeling of the plasticizing operation in the hot plate welding process / Krzysztof Wałęsa (WIM), Krzysztof Talaśka (WIM), Dominik Wilczyński (WIM), Jan Górecki (WIM), Dominik Wojtkowiak (WIM) // Archives of Civil and Mechanical Engineering - 2022, vol. 22, iss. 1, p. 16-1-16-25

Scientific article 140.0 4.369

7.

Low-cost VR system for interactive education of manual assembly procedure / Damian Grajewski (WIM), Adam Hamrol (WIM) // Interactive Learning Environments - 2022, in press

Scientific article 140.0 3.928

8.

Low-speed radial piston pump as an effective alternative power transmission for small hydropower plants / Michał Zielinski (WIM), Adam Myszkowski (WIM), Marcin Pelic (WIM), Roman Staniek (WIM) // Renewable Energy - 2022, vol. 182, p. 1012-1027

Scientific article 140.0 8.001

9.

Magnetic properties of Co-Tb alloy films and Tb/Co multilayers as a function of concentration and thickness / Łukasz Frąckowiak, Feliks Stobiecki, Maciej Urbaniak, Michał Matczak, Gabriel David Chaves-O`flynn, Mikołaj Bilski (WIM), Andreas Glenz, Piotr Kuświk // Journal of Magnetism and Magnetic Materials - 2022, vol. 544, p. 168682-1-168682-8

Scientific article 100.0 2.993

10.

RBF-DQ algorithms for elliptic problems in axisymmetric domains / C .S. Chen, Małgorzata Jankowska (WIM), Andreas Karageorghis // Numerical Algorithms - 2022, in press

Scientific article 100.0 3.041

11.

Tribological and thermal behavior with wear identification in contact interaction of the Ti6Al4V-sintered carbide with AlTiN coatings pair / Marta Bogdan-Chudy, Piotr Niesłony, Munish K. Gupta, Szymon Wojciechowski (WIM), Radosław W. Maruda, Józef Gawlik, Grzegorz M. Królczyk // Tribology International - 2022, in press

Scientific article 200.0 4.872

12.

Analysis of the usability of rolling resistance measurement methods to study the mechanisms of some wheelchairs / Łukasz Warguła (WIM), Mateusz Kukla (WIM), Vassiliy Yurchenko, Aliya Kukesheva // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012063-1-012063-12

Scientific article / paper 5.0

13.

Design and FEM strength analysis of an innovative design of a front loader with an extension dedicated to the KUBOTA M5 / Łukasz Gierz (WIM), Tomasz Zwiachel (WILiT), Mikołaj Spadło (WIM), Olga Zharkevich, Aliya Kukesheva, Ainash Marx, Maciej Mataj (WILiT) // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012010-1-012010-7

Scientific article / paper 5.0

14.

Design Issues Related to the Construction of Automatic Devices for Conveyor Belt Perforation / Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Dominik Wilczyński (WIM), Jan Górecki (WIM), Grzegorz Domek // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012101-1-012101-9

Scientific article / paper 5.0

15.

Issues related to an attempt to recreate the geometry of a non-standard spur gear / Karol Konecki, Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Andrzej Kołodziej, Grzegorz Domek // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012105-1-012105-9

Scientific article / paper 5.0

16.

Optimization of the drive mechanism with lead screw using Isight software / Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Karol Konecki // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012103-1-012103-13

Scientific article / paper 5.0

17.

Preliminary analysis of the sensitivity of the FEM model of the process of dry ice extrusion in the die with a circularly converging channel on the changing its geometrical parameters / Jan Górecki (WIM) // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012006-1-012006-9

Scientific article / paper 5.0

18.

Structural analysis of non-standard geometric variants of a shifted spur gear / Karol Konecki, Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Andrzej Kołodziej, Grzegorz Domek // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1199, p. 012002-1-012002-15

Scientific article / paper 5.0

19.

3D Parametric and Nonparametric Description of Surface Topography in Manufacturing Processes / Grzegorz Królczyk, Wojciech Kacalak, Michał Wieczorowski (WIM) // Materials - 2021, vol. 14, no. 8, p. 1987-1-1987-7

Editorial

20.

ABS filament moisture compensation possibilities in the FDM process / Radosław Wichniarek (WIM), Adam Hamrol (WIM), Wiesław Kuczko (WIM), Filip Górski (WIM), Michał Rogalewicz (WIM) // CIRP Journal of Manufacturing Science and Technology - 2021, vol. 35, p. 550-559

Scientific article 100.0 3.602

21.

Acetabular shape and orientation of the spastic hip in children with cerebral palsy / Marek Jóźwiak, Michał Rychlik (WIM), Wiesław Szymczak, Andrzej Grzegorzewski, Bartosz Musielak // Developmental Medicine & Child Neurology - 2021, vol. 63, no. 5, p. 608-613

Scientific article 100.0 5.449

22.

A Coupled Eulerian-Lagrangian Simulation and Tool Optimization for Belt Punching Process with a Single Cutting Edge / Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Dominik Wilczyński (WIM), Jan Górecki (WIM), Krzysztof Wałęsa (WIM) // Materials - 2021, vol. 14, no. 18, p. 5406-1-5406-17

Scientific article 140.0 3.623

23.

A Device for Measuring the Rotational Speed of a Chain Sprocket of a Petrol Chainsaw / Mateusz Wróbel (WIM), Bartosz Jakubek (WIM), Wojciech Rukat (WIM) // Advances in Science and Technology Research Journal - 2021, vol. 15, no. 3, p. 99-107

Scientific article 70.0

24.

A Digital Repository of Science Assets as a Tool for Knowledge Transfer to Manufacturing Enterprises / Beata Starzyńska (WIM), Agnieszka Klembalska // Management and Production Engineering Review - 2021, vol. 12, no. 2, p. 115-123

Scientific article 70.0

25.

Advanced SA/PVA-based hydrogel matrices with prolonged release of Aloe vera as promising wound dressings / Katarzyna Bialik-Wąs, Klaudia Pluta, Dagmara Malina, Mateusz Barczewski (WIM), Katarzyna Malarz, Anna Mrozek-Wilczkiewicz // Materials Science and Engineering C - 2021, vol. 120, p. 111667-1-111667-14

Scientific article 140.0 7.328

26.

Advanced Structural and Technological Method of Reducing Distortion in Thin-Walled Welded Structures / Piotr Horajski, Łukasz Bohdal, Leon Kukiełka, Radosław Patyk, Paweł Kałduński, Stanisław Legutko (WIM) // Materials - 2021, vol. 14, no. 3, p. 1-24

Scientific article 140.0 3.623

27.

A heijunka study for the production of standard parts included in a customized finished product / Paulina Rewers (WIM), Jacek Diakun (WIM) // PLoS ONE - 2021, vol. 16, iss. 12, p. e0260515.-1-e0260515.-13

Scientific article 100.0 3.240

28.

A meshless generalized finite difference method for solving shallow water equations with the flux limiter technique / Po-Wei Li, Chia-Ming Fan, Jakub Krzysztof Grabski (WIM) // Engineering Analysis with Boundary Elements - 2021, vol. 131, p. 159-173

Scientific article 100.0 2.964

29.

A Method to Improve Planning of Product Placement on a Printing Sheet / Kateryna Czerniachowska, Krzysztof Żywicki (WIM), Radosław Wichniarek (WIM) // Management and Production Engineering Review - 2021, vol. 12, no. 1, p. 119-128

Scientific article 70.0

30.

Amplified Vasodilatation within the Referred Pain Zone of Trigger Points Is Characteristic of Gluteal Syndrome - A Type of Nociplastic Pain Mimicking Sciatica / Elżbieta Skorupska, Tomasz Dybek, Michał Rychlik (WIM), Marta Jokiel, Jarosław Zawadziński, Paweł Dobrakowski // Journal of Clinical Medicine - 2021, vol. 10, iss. 21, p. 5146-1-5146-11

Scientific article 140.0 4.241

31.

Analysis of process of metal filling of ceramic preforms using Darcy's law / Katarzyna Gawdzińska, Paweł Szymański (WIM), Dorota Nagolska (WIM) // Acta Physica Polonica A - 2021, vol. 138, no. 2, p. 189-191

Scientific article 40.0 0.577

32.

Analysis of Selected IT Tools Supporting Eco-Design in the 3D CAD Environment / Anna Dudkowiak (WIM), Damian Grajewski (WIM), Ewa Dostatni (WIM) // IEEE Access - 2021, vol. 9, p. 134945-134956

Scientific article 100.0 3.367

33.

Analysis of surface texture of plateau-honed cylinder liner – a review / Paweł Pawlus, Rafał Reizer, Michał Wieczorowski (WIM) // Precision Engineering - 2021, vol. 72, p. 807-822

Scientific article 200.0 3.156

34.

Analysis of technology and machining devices for cleaning onion in the food industry / Paweł Woźniak (WIM), Stanisław Nosal (WILiT), Agata Bieńczak // MATEC Web of Conferences - 2021, vol. 343, p. 01006-1-01006-7

Scientific article / paper 5.0

35.

Analysis of the Displacement of Thin-Walled Workpiece Using a High-Speed Camera during Peripheral Milling of Aluminum Alloys / Jakub Czyżycki (WIM), Paweł Twardowski (WIM), Natalia Znojkiewicz (WIM) // Materials - 2021, vol. 14, no. 16, p. 4771-1-4771-12

Scientific article 140.0 3.623

36.

Analyzing the Stability for the Motion of an Unstretched Double Pendulum Near Resonance / Tarek S. Amer, Roman Starosta (WIM), Adelkarim S. Elameer, Mohamed A. Bek // Applied Sciences - 2021, vol. 11, no. 20, p. 9520-1-9520-22

Scientific article 70.0 2.679

37.

An Analytical Modelling of Demand for Driving Torque of a Wheelchair with Electromechanical Drive / Mateusz Kukla (WIM), Bartosz Wieczorek (WIM), Łukasz Warguła (WIM), Jan Górecki (WIM), Marcin Giedrowicz (WA) // Energies - 2021, vol. 14, no. 21, p. 7315-1-7315-20

Scientific article 140.0 3.004

38.

A novel approach for pattern recognition by using graph theory and its application in mechanical engineering / Matej Babič, Gyula Varga, Daniel Ghiculescu, Michał Jakubowicz (WIM), Stanislav Slavov, George Seritan, Dragan Marinković // Academic Journal of Manufacturing Engineering - 2021, vol. 19, iss. 3, p. 5-10

Scientific article 40.0

39.

Application of a simulation model to the prognosis of material loss in wood processing / Krzysztof Żywicki (WIM), Tomasz Bartkowiak (WIM), Agnieszka Kujawińska (WIM) // PLoS ONE - 2021, vol. 16, iss. 2, p. e0246325-1-e0246325-13

Scientific article 100.0 3.240

40.

Application of digital holographic microscopy to evaluate the dynamics of a single red blood cell influenced by low-power laser light / Dawid Kucharski (WIM), Monika Bartczak (WIM) // Optics & Laser Technology - 2021, vol. 142, p. 107262-1-107262-11

Scientific article 100.0 3.867

41.

Application of Grey Systems Theory in the Analysis of Data Obtained from Family Businesses / Ewa Więcek-Janka (WIZ), Rafał Mierzwiak (WIZ), Marcin Nowak (WIZ), Agnieszka Kujawińska (WIM), Joanna Majchrzak (WIZ) // European Research Studies Journal - 2021, vol. 24, iss. 1, p. 494-510

Scientific article 100.0

42.

Application of Magnetic Concentrator for Improvement in Rapid Temperature Cycling Technology / Krzysztof Mrozek (WIM), Paweł Muszyński (WIM), Przemysław Poszwa (WIM) // Polymers - 2021, vol. 13, iss. 1, p. 91-1-91-17

Scientific article 100.0 4.329

43.

Application of piezoelectric fast tool servo for turning non-circular shapes made of 6082 aluminum alloy / Marcin Tadeusz Pelic (WIM), Bartosz Gapiński (WIM), Wojciech Ptaszyński (WIM) // Applied Sciences - 2021, vol. 11, no. 16, p. 7533-1-7533-15

Scientific article 70.0 2.679

44.

Application of Selective Induction Heating for Improvement of Mechanical Properties of Elastic Hinges / Paweł Muszyński (WIM), Przemysław Poszwa (WIM), Andrzej Gessner (WIM), Krzysztof Mrozek (WIM) // Materials - 2021, vol. 14, no. 10, p. 2543-1-2543-14

Scientific article 140.0 3.623

45.

Application of the MEMS Accelerometer as the Position Sensor in Linear Electrohydraulic Drive / Dominik Rybarczyk (WIM) // Sensors - 2021, vol. 21, no. 4, p. 1479-1-1479-15

Scientific article 100.0 3.576

46.

Applying Criteria Equations in Studying the Energy Efficiency of Pump Systems / Gencho Popov, Stanisław Legutko (WIM), Kliment Klimentov, Boris Kostov // Energies - 2021, vol. 14, no. 17, p. 5256-1-5256-13

Scientific article 140.0 3.004

47.

Assembly Sequence Planning Using Artificial Neural Networks for Mechanical Parts Based on Selected Criteria / Marcin Suszyński (WIM), Katarzyna Peta (WIM) // Applied Sciences - 2021, vol. 11, no. 21, p. 10414-1-10414-15

Scientific article 70.0 2.679

48.

Assessment of selected metrological properties of laser triangulation sensors / Natalia Swojak (WIM), Michał Wieczorowski (WIM), Michał Jakubowicz (WIM) // Measurement : Journal of the International Measurement Confederation - 2021, vol. 176

Scientific article 200.0 3.927

49.

A Unit for Inflating and Maintaining a Constant Pressure in the Tires During the Movement of a Slow-Moving Vehicle / Konrad Jan Waluś (WIM), Mateusz Kozłowski // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1016, p. 012012-1-012012-9

Scientific article / paper 5.0

50.

Automated test bench for research on electrostatic separation in plastic recycling application / Roman Regulski (WIM), Dorota Czarnecka-Komorowska (WIM), Cezary Jędryczka (WARiE), Dariusz Sędziak (WIM), Dominik Rybarczyk (WIM), Krzysztof Netter (WIM), Mariusz Barański (WARiE), Mateusz Barczewski (WIM) // Bulletin of the Polish Academy of Sciences. Technical Sciences - 2021, vol. 69, no. 2, p. e136719-1-e136719-10

Scientific article 100.0 1.662

51.

Bone Density Micro-CT Assessment during Embedding of the Innovative Multi-Spiked Connecting Scaffold in Periarticular Bone to Elaborate a Validated Numerical Model for Designing Biomimetic Fixation of Resurfacing Endoprostheses / Ryszard Uklejewski, Mariusz Winiecki, Adam Patalas (WIM), Piotr Rogala // Materials - 2021, vol. 14, no. 6, p. 1384-1-1384-19

Scientific article 140.0 3.623

52.

Buckling and post-buckling behaviour of selected cold-formed C-beams with atypical flanges / Paweł Jasion (WIM), Aleksandra Pawlak (WIM), Piotr Paczos (WIM) // Engineering Structures - 2021, vol. 244, p. 112693-1-112693-13

Scientific article 140.0 4.471

53.

Cancellation of Auxetic Properties in F.C.C. Hard Sphere Crystals by Hybrid Layer-Channel Nanoinclusions Filled by Hard Spheres of Another Diameter / Jakub W. Narojczyk, Krzysztof Wojciechowski, Jerzy Smardzewski, Attila R. Imre, Joseph N. Grima, Mikołaj Bilski (WIM) // Materials - 2021, vol. 14, no. 11, p. 3008-1-3008-14

Scientific article 140.0 3.623

54.

Cast Iron Parts Obtained in Ceramic Molds Produced by Binder Jetting 3D Printing - Morphological and Mechanical Characterization / Răzvan Păcurar, Petru Berce, Ovidiu Nemeş, Diana-Irinel Băilă, Dan Sergiu Stan, Alexandru Oarcea, Florin Popişter, Cristina Miron-Borzan, Sven Maricic, Stanisław Legutko (WIM), Ancuţa Păcurar // Materials - 2021, vol. 14, no. 16, p. 4502-1-4502-22

Scientific article 140.0 3.623

55.

Centrifugal Compressor Stall Control by the Application of Engineered Surface Roughness on Diffuser Shroud Using Numerical Simulations / Amjid Khan, Muhammad Irfan, Usama Muhammad Niazi, Imran Shah, Stanisław Legutko (WIM), Saifur Rahman, Abdullah Saeed Alwadie, Mohammed Jalalah, Adam Glowacz, Mohammad Kamal Asif Khan // Materials - 2021, vol. 14, no. 8, p. 2033-1-2033-18

Scientific article 140.0 3.623

56.

Chaotic evolutionary algorithms for dynamic instability enhancement / Filip Sarbinowski (WIM), Remigiusz Łabudzki (WIM), Rafał Talar (WIM) // Journal of Physics: Conference Series - 2021, vol. 1781, p. 012003-1-012003-10

Scientific article 40.0

57.

Chemical compounds released by combustion of polymer composites flat belts / Piotr Krawiec (WIM), Łukasz Warguła (WIM), Dorota Czarnecka-Komorowska (WIM), Paweł Janik, Anna Dziechciarz, Piotr Kaczmarzyk // Scientific Reports - 2021, vol. 11, p. 8269-1-8269-10

Scientific article 140.0 4.379

58.

Cluster-based network model / Hao Li, Daniel Fernex, Richard Semaan, Jianguo Tan, Marek Morzyński (WIM), Bernd R. Noack // Journal of Fluid Mechanics - 2021, vol. 906, p. A21-1-A21-41

Scientific article 140.0 3.627

59.

Coffee Silverskin as a Multifunctional Waste Filler for High-Density Polyethylene Green Composites / Aleksander Hejna, Mateusz Barczewski (WIM), Paulina Kosmela, Olga Mysiukiewicz (WIM), Anton Kuzmin // Journal of Composites Science - 2021, vol. 5, iss. 2, p. 1-13

Scientific article 20.0

60.

Comparative Analysis of Polyurethane Drive Belts with Different Cross-Section Using Thermomechanical Tests for Modeling the Hot Plate Welding Process / Krzysztof Wałęsa (WIM), Anna Wrzesińska, Marta Dobrosielska, Krzysztof Talaśka (WIM), Dominik Wilczyński (WIM) // Materials - 2021, vol. 14, no. 14, p. 3826-1-3826-25

Scientific article 140.0 3.623

61.

Comparative Study of the Reinforcement Type Effect on the Thermomechanical Properties and Burning of Epoxy-Based Composites / Kamila Sałasińska, Mateusz Barczewski (WIM), Joanna Aniśko (WIM), Aleksander Hejna, Maciej Celiński // Journal of Composites Science - 2021, vol. 5, iss. 3, p. 89-1-89-19

Scientific article 20.0

62.

Comparison of Various Chemical Treatments Efficiency in Relation to the Properties of Flax, Hemp Fibers and Cotton trichomes / Danuta Matykiewicz (WIM), Mateusz Barczewski (WIM), Olga Mysiukiewicz (WIM), Katarzyna Skórczewska // Journal of Natural Fibers - 2021, vol. 18, no. 5, p. 735-751

Scientific article 40.0 5.323

63.

Composition‑property relationship of polyurethane networks based on polycaprolactone diol / Ivan S. Stefanović, Jasna V. Džunuzović, Enis S. Džunuzović, Aleksandra Dapčević, Sanja I. Šešlija, Bojana D. Balanč, Monika Dobrzyńska-Mizera (WIM) // Polymer Bulletin - 2021, vol. 78, iss. 12, p. 7103-7128

Scientific article 40.0 2.870

64.

Contact angle analysis of surface topographies created by electric discharge machining / Katarzyna Peta (WIM), Tomasz Bartkowiak (WIM), Przemysław Galek (WTCH), Michał Mendak (WIM) // Tribology International - 2021, vol. 163, p. 107139-1-107139-14

Scientific article 200.0 4.872

65.

Conventional Selection of Mechanical Fasteners for Flat Belts / Karol Konecki, Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Andrzej Kołodziej, Grzegorz Domek // Applied Sciences - 2021, vol. 11, no. 7, p. 2916-1-2916-26

Scientific article 70.0 2.679

66.

Conventional Shaping the Edges of Thick Steel Plates After Welding Process / Waldemar Matysiak (WIM), Miroslav Duspara, Josip Cumin, Ivan Samardžić // Tehnički Vjesnik - Technical Gazette - 2021, vol. 28, no. 2, p. 663-667

Scientific article 40.0 0.783

67.

Copper slag as a potential waste filler for polyethylene-based composites manufacturing / Aleksander Hejna, Paulina Kosmela, Mateusz Barczewski (WIM), Olga Mysiukiewicz (WIM), Adam Piasecki (WIMiFT) // Tanzania Journal of Science - 2021, vol. 47, no. 2, p. 405-420

Scientific article 5.0

68.

Corrosion Resistance and Surface Bioactivity of Ti6Al4V Alloy after Finish Turning under Ecological Cutting Conditions / Kamil Leksycki, Agnieszka Kaczmarek-Pawelska, Kamil Ochał, Andrzej Gradzik, Danil Yurievich Pimenov, Khaled Giasin, Daniel Chuchała, Szymon Wojciechowski (WIM) // Materials - 2021, vol. 14, no. 22, p. 6917-1-6917-16

Scientific article 140.0 3.623

69.

Cutting Forces during Inconel 718 Orthogonal Turn-Milling / Agata Felusiak-Czyryca (WIM), Marek Madajewski (WIM), Paweł Twardowski (WIM), Martyna Wiciak-Pikuła (WIM) // Materials - 2021, vol. 14, no. 20, p. 6152-1-6152-14

Scientific article 140.0 3.623

70.

Cutting tool wear in turning 316L stainless steel in the conditions of minimized lubrication / Natalia Szczotkarz, Roland Mrugalski, Radoslaw W. Maruda, Grzegorz M. Królczyk, Stanisław Legutko (WIM), Kamil Leksycki, Daniel Dębowski, Catalin Iulian Pruncu // Tribology International - 2021, vol. 156, p. 106813-1-106813-11

Scientific article 200.0 4.872

71.

Design and Simulation Study of the Induction Heated Injection Mold with Sliders / Paweł Muszyński (WIM), Przemysław Poszwa (WIM), Krzysztof Mrozek (WIM), Michał Zielinski (WIM), Piotr Dalewski (WIM), Michał Kowal (WIM) // Materials - 2021, vol. 14, no. 23, p. 7476-1-7476-15

Scientific article 140.0 3.623

72.

Design of a Home Fire Detection System Using Arduino and SMS Gateway / Suwarjono Suwarjono, Izak Habel Wayangkau, Teddy Instanto, Rachmat Rachmat, Marsujitullah Marsujitullah, Hariyanto Hariyanto, Wahyu Caesarendra, Stanisław Legutko (WIM), Adam Głowacz // Knowledge - 2021, vol. 1, iss. 1, p. 61-74

Scientific article 5.0

73.

Determining the Coefficient of Friction of Wood-Based Materals for Furniture Panels in the Aspect of Modelling Their Shredding Process / Mateusz Kukla (WIM), Łukasz Warguła (WIM), Aleksandra Biszczanik (WIM) // Wood Research - 2021, vol. 66, no. 5, p. 789-805

Scientific article 70.0 1.139

74.

Determining the Power Consumption of the Automatic Device for Belt Perforation Based on the Dynamic Model / Dominik Wojtkowiak (WIM), Krzysztof Talaśka (WIM), Dominik Wilczyński (WIM), Jan Górecki (WIM), Krzysztof Wałęsa (WIM) // Energies - 2021, vol. 14, no. 1, p. 317-1-317-15

Scientific article 140.0 3.004

75.

Development of a testing station for empirical verification of the algebraic model of dry ice piston extrusion / Jan Górecki (WIM) // Acta Mechanica et Automatica - 2021, vol. 15, no. 3, p. 107-112

Scientific article 40.0

76.

Development of Toughened Flax Fiber Reinforced Composites. Modification of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Reactive Extrusion Process / Jacek Andrzejewski (WIM), Michał Nowakowski (WIMiFT) // Materials - 2021, vol. 14, no. 6, p. 1-1523-21-1523

Scientific article 140.0 3.623

77.

Diagnostics of the Thermal Condition of the Cable Gear Used in the Drive of a Wood Chipper / Piotr Krawiec (WIM), Łukasz Warguła (WIM), Leszek Różański (WIM) // IOP Conference Series: Materials Science and Engineering - 2021, vol. 1016, p. 012013-1-012013-10

Scientific article / paper 5.0

78.

Differences in Roughness Parameter Values from Skid and Skidless Contact Stylus Profilometers / Karol Grochalski (WIM), Michał Mendak (WIM), Michał Jakubowicz (WIM), Bartosz Gapiński (WIM), Natalia Swojak (WIM), Michał Wieczorowski (WIM), Aleksandra Krawczyk // Advances in Science and Technology Research Journal - 2021, vol. 15, no. 1, p. 58-70

Scientific article 70.0

79.

Digital Twins in Product Lifecycle for Sustainability in Manufacturing and Maintenance / Izabela Rojek, Dariusz Mikołajewski, Ewa Dostatni (WIM) // Applied Sciences - 2021, vol. 11, no. 1, p. 31-1-31-19

Scientific article 70.0 2.679

80.

Discharge Energy as a Key Contributing Factor Determining Microgeometry of Aluminum Samples Created by Electrical Discharge Machining / Katarzyna Peta (WIM), Michał Mendak (WIM), Tomasz Bartkowiak (WIM) // Crystals - 2021, vol. 11, iss. 11, p. 1371-1-1371-23

Scientific article 70.0 2.589

81.

Discrimination of Surface Topographies Created by Two-Stage Process by Means of Multiscale Analysis / Tomasz Bartkowiak (WIM), Karol Grochalski (WIM), Bartosz Gapiński (WIM), Michał Wieczorowski (WIM) // Materials - 2021, vol. 14, no. 22, p. 7044-1-7044-19

Scientific article 140.0 3.623

82.

Dynamic Model of a Humanoid Exoskeleton of a Lower Limb with Hydraulic Actuators / Sebastian Glowinski, Maciej Obst (WIM), Sławomir Majdanik, Barbara Potocka-Banaś // Sensors - 2021, vol. 21, no. 10, p. 3432-1-3432-20

Scientific article 100.0 3.576

83.

Dynamic model of a logistic train with different steering systems and tire models / Wojciech Paszkowiak (WIM), Tomasz Bartkowiak (WIM) // Latin American Journal of Solids and Structures - 2021, vol. 18, no. 1, p. e339-1-e339-27

Scientific article 70.0 1.245

84.

Effectiveness of Automatic CAM Programming Using Machining Templates for the Manufacture of Special Production Tooling / Maciej Kowalski, Przemysław Zawadzki (WIM), Adam Hamrol (WIM) // Strojniški vestnik - Journal of Mechanical Engineering - 2021, vol. 67, no. 10, p. 1-16

Scientific article 100.0 1.554

85.

Effect of Ball-Milling Process Parameters on Mechanical Properties of Al/Al2O3/Collagen Powder Composite using Statistical Approach / Shashi Prakash Dwivedi, Ambuj Saxena, Shubham Sharma, Gursharan Singh, Jujhar Singh, Mozammel Mia, Somnath Chattopadhyaya, Alokesh Pramanik, Danil Yurievich Pimenov, Szymon Wojciechowski (WIM) // Journal of Materials Research and Technology - 2021, vol. 15, p. 2918-2932

Scientific article 100.0 5.039

86.

Effect of enzymatic versus titanium dioxide/silicon dioxide catalyst on crystal structure of ‘green’ poly[(butylene succinate)‐co‐(dilinoleic succinate)] copolymers / Martyna Sokołowska, Ewa Stachowska (WIM), Michalina Czaplicka (WIM), Miroslawa El Fray // Polymer International - 2021, vol. 70, no. 5, p. 514-526

Scientific article 70.0 2.990

87.

Effect of Rotating Magnetic Field on Microstructure in AlCuSi Alloys / Piotr Mikołajczak (WIM) // Metals - 2021, vol. 11, iss. 11, p. 1804-1-1804-24

Scientific article 70.0 2.351

88.

Effect of Sub-Zero Treatments and Tempering on Corrosion Behaviour of Vanadis 6 Tool Steel / Peter Jurči, Aneta Bartkowska (WIMiFT), Mária Hudáková, Mária Dománková, Mária Čaplovičová, Dariusz Bartkowski (WIM) // Materials - 2021, vol. 14, no. 13, p. 3759-1-3759-26

Scientific article 140.0 3.623

89.

Efficiency study of aeroelastic energy harvester via analytical approach / Filip Sarbinowski (WIM), Remigiusz Łabudzki (WIM), Rafał Talar (WIM) // Journal of Physics: Conference Series - 2021, vol. 1781, p. 012002-1-012002-8

Scientific article 40.0

90.

Elastic–plastic torsion problem with non-linear hardenings using the method of fundamental solution / Farzad Moayyedian, Jakub Krzysztof Grabski (WIM) // Archives of Civil and Mechanical Engineering - 2021, vol. 21, no. 4, p. 155-1-155-21

Scientific article 140.0 4.369

91.

Electrodermal and thermal measurement of users’ emotional reaction for a visual stimuli / Marcin Jukiewicz, Paweł Łupkowski, Radomir Majchrowski (WIM), Joanna Marcinkowska, Dawid Ratajczyk // Case Studies in Thermal Engineering - 2021, vol. 27, p. 101303-1-101303-8

Scientific article 70.0 4.724

92.

Estimation of the Compressive Strength of Corrugated Cardboard Boxes with Various Openings / Tomasz Garbowski (WILiT), Tomasz Gajewski (WILiT), Jakub Krzysztof Grabski (WIM) // Energies - 2021, vol. 14, no. 1, p. 155-1-155-20

Scientific article 140.0 3.004

93.

Estimation of the compressive strength of corrugated cardboard boxes with various perforations / Tomasz Garbowski, Tomasz Gajewski (WILiT), Jakub K. Grabski (WIM) // Energies - 2021, vol. 14, no. 4, p. 1095-1-1095-14

Scientific article 140.0 3.004

94.

Evaluation of the Cause and Consequences of Defects in Cast Metal-Ceramic Composite Foams / Paweł Popielarski (WIM), Robert Sika (WIM), Dorota Czarnecka (WIM), Paweł Szymański (WIM), Michał Rogalewicz (WIM), Katarzyna Gawdzińska // Archives of Foundry Engineering - 2021, vol. 21, iss. 1, p. 81-88

Scientific article 40.0

95.

Experimental and Numerical Analysis of the Depth of the Strengthened Layer on Shafts Resulting from Roller Burnishing with Roller Braking Moment / Marek Kowalik, Tomasz Trzepieciński, Leon Kukiełka, Piotr Paszta, Paweł Maciąg, Stanisław Legutko (WIM) // Materials - 2021, vol. 14, no. 19, p. 5844-1-5844-23

Scientific article 140.0 3.623

96.

Experimental and Numerical Analysis of the Depth of the Strengthened Layer on Shafts Resulting from Roller Burnishing with Roller Braking Moment / Marek Kowalik, Tomasz Trzepieciński, Leon Kukiełka, Piotr Paszta, Paweł Maciąg, Stanisław Legutko (WIM) // Materials - 2021, vol. 14, no. 19, p. 5844-1-5844-23

Scientific article 140.0 3.623

97.

Experimental and numerical analysis of the effect of compaction conditions on briquette properties / Dominik Wilczyński (WIM), Maciej Berdychowski (WIM), Krzysztof Talaśka (WIM), Dominik Wojtkowiak (WIM) // Fuel - 2021, vol. 288, p. 119613-1-119613-19

Scientific article 140.0 6.609

98.

Experimental and Numerical-Driven Prediction of Automotive Shredder Residue Pyrolysis Pathways toward Gaseous Products / Rafał Ślefarski (WIŚiE), Joanna Jójka (WIŚiE), Paweł Czyżewski (WIŚiE), Michał Gołębiewski (WIŚiE), Radosław Jankowski (WIŚiE), Jarosław Markowski (WIM), Aneta Magdziarz // Energies - 2021, vol. 14, no. 6, p. 1779-1-1779-15

Scientific article 140.0 3.004

99.

Experimental determination and numerical simulation of temperature dependent material and damage behaviour of additively manufactured polyamide 12 / Robert Roszak (WIM), Daniela Schob, Ilja Sagradov, Krzysztof Kotecki (WIM), Holger Sparr, Phillip Maasch, Rainer Franke, Matthias Ziegenhorn // Mechanics of Materials - 2021, vol. 159, p. 103893-1-103893-8

Scientific article 100.0 3.266

100.

Experimental investigation and optimization of compression moulding parameters for MWCNT/glass/kevlar/epoxy composites on mechanical and tribological properties / Hanumantharaya Rangaswamy, H. M. Harsha, Manjunath Patel Gowdru Chandrashekarappa, Danil Yu Pimenov, Khaled Giasin, Szymon Wojciechowski (WIM) // Journal of Materials Research and Technology - 2021, vol. 15, p. 327-341

Scientific article 100.0 5.039