The importance of plasma paste boriding parameters for thickness, nanomechanical properties, residual stress distribution and fracture toughness of layers produced on Nimonic 80A-alloy
[ 1 ] Instytut Inżynierii Materiałowej, Wydział Inżynierii Materiałowej i Fizyki Technicznej, Politechnika Poznańska | [ P ] pracownik
2022
artykuł naukowy
angielski
- plasma paste boriding
- nanomechanical properties
- residual stress
- fracture toughness
EN Borided layers of different thickness were produced on Nimonic 80A-alloy using plasma paste boriding method. The process was carried out at the temperature of 750 °C, 800 °C and 850 °C for 3 h and 6 h. All produced layers consisted of a fine-grained mixture of nickel borides and chromium borides. Higher boriding temperature and time resulted in the obtaining of boron-rich CrB phase in the microstructure of the borided layer. Simultaneously, this layer was characterized by higher hardness and Young’s modulus. Compressive residual stresses were generated in all produced layers. However, the most advantage course of the curve is characteristic of the borided layer produced at the highest temperature and time. The increase in layer thickness was accompanied by a decrease in the crack’s length (from 33.8 to 7.7 µm), as well as an increase in the fracture toughness (from 0.4439 to 2.4087 MPa·m1/2).
01.10.2022
108842 - 1 - 108842 - 18
Article Number: 108842
Czasopismo hybrydowe
140
5,4