Laser alloying of bearing steel with boron and self-lubricating addition
[ 1 ] Wydział Budowy Maszyn i Zarządzania, Politechnika Poznańska | [ 2 ] Instytut Inżynierii Materiałowej, Wydział Budowy Maszyn i Zarządzania, Politechnika Poznańska | [ D ] doktorant | [ P ] pracownik
PL Laserowe stopowanie stali łożyskowej borem i dodatkiem samosmarującym
2016
artykuł naukowy
angielski
- laser boriding
- self-lubricating addition
- hardness
- wear resistance
EN 100CrMnSi6–4 bearing steel has been widely used for many applications, e.g. rolling bearings which work in difficult operating conditions. Therefore, this steel has to be characterized by special properties such as high wear resistance and high hardness. In this study laser-boriding was applied to improve these properties. Laser alloying was conducted as the two step process with two different types of alloying material: amorphous boron only and amorphous boron with addition of calcium fluoride CaF2. At first, the surface was coated with paste including alloying material. Second step of the process consisted in laser re-melting. The surface of sample, coated with the paste, was irradiated by the laser beam. In this study, TRUMPF TLF 2600 Turbo CO2laser was used. The microstructure, microhardness and wear resistance of both laser-borided layer and laser-borided layer with the addition of calcium fluoride were investigated. The layer, alloyed with boron and CaF2, was characterized by higher wear resistance than the layer after laser boriding only.
7 - 11
CC BY-NC-ND (uznanie autorstwa - użycie niekomercyjne - bez utworów zależnych)
otwarte czasopismo
ostateczna wersja opublikowana
w momencie opublikowania
publiczny
7