Surface condition, microstructure and microhardness of boronized layers produced on Vanadis-6 steel after modification by diode laser
[ 1 ] Instytut Inżynierii Materiałowej, Wydział Budowy Maszyn i Zarządzania, Politechnika Poznańska | [ 2 ] Instytut Technologii Materiałów, Wydział Budowy Maszyn i Zarządzania, Politechnika Poznańska | [ 3 ] Instytut Technologii Mechanicznej, Wydział Budowy Maszyn i Zarządzania, Politechnika Poznańska | [ P ] pracownik
2017
artykuł naukowy
angielski
- boronized layer
- laser remelting
- microstructure
- microhardness
EN The paper presents the study results of surface condition, microstructure and microhardness of Vanadis-6 tool steel after diffusion boriding and laser modification by diode laser. As a result of diffusion boriding the layers consisted of two phases: FeB and Fe 2B. A bright area under the continuous boronized layers was visible. This zone was probably rich in boron. As a result of laser surface modification of boronized layers, the microstructure composed of three zones: remelted zone, heat affected zone and the substrate was obtained. The microstructure of remelted zone consisted of boron-martensite eutectic. The depth of laser track (total thickness of remelted zone and heat affected zone) was dependent on laser parameters (laser beam power density and scanning laser beam velocity). The microhardness of laser remelting boronized layer in comparison with diffusion boronized layer was slightly lower. The presence of heat affected zone was advantageous, because it allowed to obtain a mild microhardness gradient between the layer and the substrate.
21.06.2017
70 - 75
CC BY-NC-ND (uznanie autorstwa - użycie niekomercyjne - bez utworów zależnych)
otwarte czasopismo
ostateczna wersja opublikowana
6 miesięcy po opublikowaniu
publiczny
7
7