2022

Archives of Civil and Mechanical Engineering

Rocznik: 2022 | Tom: vol. 22 | Numer: iss. 1

artykuł naukowy

angielski

EN The paper discusses the topic of butt welding of polyurethane drive belts by the hot plate method in the context of modeling the process of this technological operation. Based on the analysis of the butt welding process, a series of studies of the thermomechanical properties of the material from which the belt is made has been planned. The results will be used for mathematical modeling of the welding process, and in particular its most important phase: the plasticizing operation. On this basis, the study of the compression of cylindrical specimens taken from the belt has been performed at two different speeds. Their result is the relationship between the compressive stress σ_c and the modulus of longitudinal elasticity E_c at compression and: deformation ε_c, temperature value T, as well as the compressive velocity v_c. In the next step, dynamic viscosity η of the belt material was determined based on the results of dynamic thermomechanical analysis. The research work culminated in the attempts to plasticize the material on a hot plate, in conditions similar to the process of industrial welding. These studies were performed at different speeds v_pl, resulting in the correlation between the force required for plasticizing F_pl and the value of the speed of the belt end v_pl relative to the hot plate heated to a temperature T_p. The obtained results will be used to formulate a mathematical model of plasticizing the material, based on the selected mechanical deformation models.

16-1 - 16-25

10.1007/s43452-021-00336-x

https://link.springer.com/article/10.1007%2Fs43452-021-00336-x

article number : 16

CC BY (uznanie autorstwa)

czasopismo hybrydowe

ostateczna wersja opublikowana

30.11.2021 (Data domniemana)

w momencie opublikowania

Pobierz plik

publiczny

140

4,4